For both models, it is possible to add only one power module for redundancy. During installation, it is necessary to use appropriate Personal Protective Equipment such as protective gloves and safety shoes. Insert the power modules one at a time starting from the bottom. Insert two screwdrivers into the upper parts of the plastic slot cover where the power module is to be installed. Slightly rotate the screwdrivers downwards to release the cover. Remove the metal supports for the plastic cover panels. For the Keor MOD RI 25, unscrew 6 M3 screws to remove 2 supports. For the Keor MOD RI 50, unscrew 8 M3 screws to remove 3 supports.
Find the answers to your questions
How can I install the power modules inside the Keor Mod RI?
Did this article help you ?
Have more questions? Submit a request